Відео

The handle is secured with a snapper pin so it is unlikely they would pop open.

Yes you can trim the hook bolt down as needed. This should be outlined in the installation instructions as well.

@TorkliftUSA Thank you, they came with my camper. I never got any instructions.

Thanks for the support!

You need one turnbuckle for each tie down anchor point. A total of 4.

No it is not.

@@TorkliftUSA thank you so very much for replying!! 😃

Great tip!

You bet!

Hello, do you have full length running boards that extend past the cab length?

Hi there, what is the width between your door flanges?

​@@TorkliftUSA23 1/2 inches

@@ZAR66 Thank you. Unfortunately, the Uprising will not work with your set up. The door bracket comes in widths of 24", 26" and 28".

GRACIAS MI AMIGO 👍👍👍👍😎😎😎😎😎🤝🤝🤝🤝

Hi there, thank you for reaching out. You can visit this link to see a list of online and local dealers - www.torklift.com/where-to-buy . I hope this helps!

The C2204 is designed to fit the 8' bed and the C2205 is designed for the 6.5' bed.

Noted! Are there any specific questions I can answer for you?

YES - music makes video hard to understand plus it is obnoxious

Hi there, as long as you have clearance for the factory flip down step, you should not see any clearance issues for the the GlowStep Revolution Uprising. Hope this helps!

Hello there. What is the cab size and bed length of your truck?

Is the parking brake set? You can try releasing the tension on the parking brake and that should allow some movement.

Hello, we are in the process of confirming the fitment for the 2023 F350. Please call our tech support team at 800-246-8132 for more info!

Hey Jonathan! Here is another video that goes over how to use the FastGuns - ua-cam.com/video/5ZNyocP_e6w/v-deo.html . Hope this helps!

Hey there, what kind of truck camper do you have?

@@TorkliftUSA Bigfoot 2500, 10'6. Model year 2001. I have what I like to call the "scissor steps of doom".

@@bob_frazier You should be able to mount our Stow N Go steps on your rig. Please send some photos over and your height measurement to support@torklift.com and they can get you set up with the correct part number.

@@TorkliftUSA Done. Thanks.

ua-cam.com/video/7ODIeaN0pIU/v-deo.html ua-cam.com/video/C1lpikXvVDI/v-deo.html

Thank you, we are glad you were able to find it helpful.

Hi there, the whole FastGun assembly including the hook bolt is made of stainless steel. The only parts that are not stainless steel are the square and nylock nut which is zinc-plated hardware and the handle which is aluminum.

Hello! The part number that will work on your truck is the x7912. You'll find it here - torkliftcentral.com/2020-2021-ford-f450-and-f350-dual-rear-wheel-north-front-hitch

@@TorkliftUSA that one goes down low not out the center correct

@@arizonalifestylechannel2186 That is correct

Actually it's the key ring that the weakest link. They also rust.

Hi Steve! The part number is dependent on your frame width. If your width is between 66" - 67.5", then you would need x8001. If your width is between 61" - 62.5", then you would need x8000. Here is more information on how to measure - www.torklift.com/tailored-hitch#find-my-fit

Hi Bryce Bell! We do not have a video at the moment but if you would like to give our tech support team a phone call at 800-246-8132, they should be able to talk you through it and send you the installation instructions if needed.

Rear mount pics would be nice for the amount you guys priced this stuff at. I need a complete set up and I want as much info as possible before I throw $900 out.

@@kilo54 Hello! Our certified dealer Etrailer has a video on their channel. Here is a link to it - ua-cam.com/video/3nokbsnr5do/v-deo.html

​@@TorkliftUSAI would also appreciate a C3205 install video. I have a short box and it looks like I have to undo a heck of a lot more than just the bumper mounts to get the brackets in there...

@@superturboawesome1 Hi there, we are working on getting some of these videos recorded and uploaded. In the meantime, our tech support team is available Monday - Friday from 8:30 am PST - 5 pm PST via email, phone call or FaceTime and they'd be happy to answer any questions you may have regarding your install.

Hi Jacob! Would you be able to send a few photos of your step well along with the year, make, and model of your RV to our tech support team at support@torklift.com? We should be able to confirm your fitment from there!

Hi there SuperAllysonm! We have seen some instants where the exhaust bracket is larger - the support bracket should still be able to be installed on your truck without drilling. If you would like to shoot a couple photos over to our support email, support@torklift.com, with ATT DJ, he should be able to walk you through it.

Ha...good one!

Hi Peter R! If you find that the hook bolt is too long to install, you can trim the bolt. You can do so with a hacksaw or a cut-off wheel.

@@TorkliftUSA Thanks. Just wanted to make sure!

@@Idiopathogen You're welcome!

Hey Darren! The hitch has a shipping weight of 80 lbs, so the hitch itself would be about 70 - 75 lbs. The tongue capacity of the Tailored hitch is 450 lbs but you will want to take a look at your owner's manual to get your trailer's capacities. Hope this helps!

Yes it did. Thank you so much!

Hi Billy! We don't have another video. If you'd like to shoot an email to support@torklift.com, we can send you a copy of the install instructions.

Hi there! The washers are designed to be slightly loose on the hook bolt. However, the issue you are having with the plastic caps is a bit out of the ordinary. Would you be able to give us a phone call at 800-246-8132 and ask for DJ or send an email to support@torklift.com with ATT: DJ in the subject line? He has been made aware of your issue and would like to talk to you about a resolution.

Hi there! The washers are designed to be slightly loose on the hook bolt. However, the issue you are having with the plastic caps is a bit out of the ordinary. Would you be able to give us a phone call at 800-246-8132 and ask for DJ or send an email to support@torklift.com with ATT: DJ in the subject line? He has been made aware of your issue and would like to talk to you about a resolution.